News is always happening the focus varies


The new era of photovoltaic wind power, aerospace wisdom creates the future

On December 12, on the occasion of the fifth anniversary of the signing of the Paris Agreement, the United Nations Climate Ambition Summit was held.China further announced a series of new measures for nationally determined contributions:By 2030, China’s carbon dioxide emissions per unit of GDP will drop by more than 65% compared to 2005, non-fossil energy will account for about 25% of primary energy consumption, and forest storage will increase by 6 billion cubic meters from 2005. Wind power, The total installed capacity of solar power will reach more than 1.2 billion kilowatts.

With the global population expansion and the rise of industrialization in developing countries, human hunger for energy has reached an unprecedented level. Traditional energy sources such as coal, oil, and natural gas are all non-renewable energy sources, but these energy sources are gradually facing exhaustion. ......

General Secretary Xi JinpingPointed out thatLow-carbon energy development is related to the future of mankind.Clean energy, including renewable energy such as hydropower, wind energy, solar energy, and biomass energy, is the main force in the development of low-carbon energy.During the Climate Ambition Summit, General Secretary Xi JinpingPublished a video titled "Continuing the past and opening up a new journey of global response to climate change"importantSpeech, proposed to create a cooperativeWin the new situation of climate governance, form a new system of climate governance that each can do their best, and adhere to the new idea of green recovery in climate governance.

Zhang Jianhua, director of the National Energy Administration, believes that in the next ten years, 70 to 80% of the increase in energy consumption will be replaced by new energy sources!

The development direction of new energy?

"White Paper on China's Energy Development in the New Era"Summarized the historical achievements of China's energy development since the 18th National Congress of the Communist Party of China. The white paper pointed out that China's energy production and utilization methods have undergone major changes, and the energy production and consumption structure has been continuously optimized, basically forming a multi-wheel-driven energy production system for coal, oil, gas, electricity, nuclear, new energy and renewable energy. Significant improvement in energy efficiency,among them,The installed capacity of hydropower, wind power, photovoltaic power generation, and biomass power generation ranks first in the world

Zhang Jianhua, Director of the National Energy AdministrationSaid: "The essence of the energy revolution is to protect the country’s energy security. It is not just the current energy security guarantee, but a long-term safe and reliable supply, and it must have a good ecological environment, low energy costs, and at the same time. To provide a basic support for the global response to climate changes, it is an inevitable choice to promote a clean and low-carbon transformation of the energy system."

From the perspective of China's power energy in recent years, wind power has become the third largest source of power after thermal power and hydropower, and solar power will also be an important trend in the development of new energy in the future. (as the picture shows)

This means that wind power, photovoltaics, monocrystalline silicon materials and other new energy industries that have attracted much attention in the industry will grow at a faster rate in the future.Aerospace Intelligent Manufacturing has long been committed to the development of the new energy industry and proposed comprehensive solutions for related industries

Intelligent manufacturing in photovoltaic new energy industry

In 2018, Aerospace Intelligent Manufacturing (Shanghai) Technology Co., Ltd. and Nanjing University of Aeronautics and Astronautics jointly researched and developed AGV robots, truss manipulator systems, accumulative inspection lines, laser coding and CCD reading quality traceability systems for single In the crystalline silicon production process, the loading and unloading of the single crystal furnace, the cutting and loading of silicon rods, the square rooting and the grinding down and other machining loading and unloading to the electrical performance test and the shape size test, it has a full cooperative operation function, high positioning accuracy, and adaptability Good flexibility of standard workpieces, strong robustness under watery ground, dusty and corrosive environment, and high degree of digitization, etc., to reduce the labor dependence of the industry, reduce labor and management costs, and improve production cycle and quality levels. Supported by excellent productivity.

Aerospace intelligent manufacturing has also improved and updated system automation control in the field of monocrystalline silicon production. It adds monitoring sensors to the production line, and uses a dedicated gateway for high-frequency data collection to collect a large amount of on-site process data and environmental data to the control platform. Features, innovatively develop a variety of algorithm models to improve on-site efficiency, quality and equipment prediction. The model has been trained and verified on site, which can effectively improve the quality and reduce the defects and losses caused by downtime.Regarding the continuous development of new products in the monocrystalline silicon industry, stay tuned!

Single crystal raw material crushing and screening

Type: crushing and sorting line, screening machine;

Applicable raw materials: edge leather, round rods, pointed ends, etc.;

Purpose: Control the particle size.

Automatic ingredient distribution system

Type: automatic batching system;

Applicable raw materials: crushed materials, powder materials, etc.;

Purpose: Precisely control the distribution ratio of each group, and automatically send it to the corresponding station through the AGV.

Electrical performance testing line

Type: detection line;

Applicable raw materials: short rods, etc.;

Main functions: barcode reading, length measurement, weighing, laser coding, low birth life detection, resistivity detection, bad identification and sorting, qualified product classification, MES communication, etc.

Square feeding and unloading system

Type: Conveying system;

Applicable raw materials: round rods, square rods, etc.;

Composition: truss type three-coordinate manipulator + buffer line + dispatching system;

Uses: product classification and distribution of fixed machines, MES communication, etc.

Grinding and unloading system

Type: Conveying system;

Applicable raw materials: round rods, square rods, etc.;

Composition: AGV + truss type three-coordinate manipulator + cache line + dispatching system;

Uses: product classification and distribution of fixed machines, MES communication, etc.

Smart manufacturing in wind power new energy industry

Aerospace Intelligence has been deeply involved in the wind power industry for many years, creatively applying aerospace technology to the wind power industry, and pioneered the wind power bolt tightening robot in the industry, which can improve the overall efficiency of automation equipment in the wind power industry, reduce the labor intensity of personnel, improve the quality of wind power, and improve products Stable performance, the utilization rate of this product in the wind power industry has reached more than 85%. At the same time, Aerospace Intelligence provides 60T, 120T, 200T intelligent logistics systems for wind power new energy mainframe manufacturers, and also provides wind power blade manufacturers with blade cutting and blade grinding AMR solutions.

Combining the profound accumulation of aerospace systems in the fields of system engineering, reliability engineering, and quality engineering, Aerospace Intelligent Manufacturing (Shanghai) Technology Co., Ltd., through unremitting innovation, development, and research and development of intelligent manufacturing serialized products, has gained a lot in many industries. With high market recognition, it has become the industry's standard equipment and is widely used. In the process of close integration of its own technological innovation and development and ever-changing market demand, the product-oriented product orientation is refined with mobile attitude adjustment, visual inspection, visual guidance, robot fastening, robot welding, and ultra-clean cleaning, and intelligent assembly and measurement lines, Smart logistics lines and automatic welding production lines are professional directions, focusing on developing key industries such as transportation logistics, aerospace, and new energy. With the development of industrial Internet of Things and 5G technology, aerospace intelligent manufacturing will use the form of intelligent manufacturing cloud platform to realize the intelligent operation and maintenance of production line equipment and the construction of process data expert database, while further improving the informatization capacity of the workshop and rational production line process planning. Sex. Aerospace Intelligent Manufacturing has always been committed to creating value for customers, creating source power for the industry, and creating more future for mankind.

Related Suggestion

Aerospace Smart Manufacturing was selected as a supplier of smart manufacturing system solutions News of Aerospace Intelligence in December Aerospace Intelligence won the patent pilot enterprise in Songjiang District Flexible conveying system for monocrystalline silicon processing line Aerospace Intelligence obtained the exclusive agency right of Bosai Metrology! Application of AGV multi-vehicle linkage technology in intelligent manufacturing Biennial China Mobile Robot Innovation Product and Innovative Application Award Cleanliness control that cannot be ignored in product quality Discussion on the Design of Automated Production of Monocrystalline Silicon Wafer News of Aerospace Intelligence in March